Release the odometer button after the service message comes on. Press the button (without holding it down) until the menu comes to the warning light that you want to reset, whether that be the brake fluid light, oil service light, or any other warning light. Follow steps 4 and 5 from the instructions above, and repeat until all relevant warning

Simple. Turn the ignition switch to position two (2). Connect the clip end of the jumper tool to a good ground in the area of the data link connector. Connect the pin end of the jumper tool to pin seven (7) of the data link connector and remove it after the appropriate time, depending on which reset you are doing.

walk through on the procedure for reseting the oil service light on a 2015 BMW 320iSubscribe to TheDriverMod! Follow the instructions below to reset the Service Minder light on your BMW 6 Series: Turn the ignition key to the “ON” position without starting the engine. If your vehicle has an ignition button, press the START-STOP ENGINE button twice without touching the brake pedal. Press and hold the RESET MILES button until you see a Service Item on 2021 R1250RT maint. reset. Im trying to get ahead of my upcoming 6k mi service notification. If its like the initial service notification which, on the TFT display, is HUGE and ANNOYING. Apparently, a solution to the maintenance reset is an OBDLink MX+ module/dongle/bluetooth and the Motoscan app for my cell phone. R8Be1Y. 474 100 172 468 276 10 371 138 344

how to reset bmw service light